miércoles, 19 de noviembre de 2014

Memoria sobre cancelación de ruido mediante DSP


Antecedentes históricos del CAR (Control Activo de Ruido)

La aplicación del principio de interferencia destructiva para conseguir zonas de silencio fue ya concebido por Lord Rayleigh en 1877 (van Overbeek, 1993) usando dos diapasones como fuentes primaria y secundaria, Sin embargo, el primero que pensó en las posibilidades de este principio para controlar el ruido fue Paul Lueg, en 1933, un científico alemán que llegó a patentar la idea tanto en Alemania como en Estados Unidos (Guicking, 1990). La siguiente figura reproduce los esquemas en la patente americana de Lueg En estos esquemas se observan ya bosquejados los fundamentos básicos del CAR: interferencia destructiva y absorción activa, Reproducimos a continuación algunas de las ideas de Lueg (traducción libre):

Captando el ruido con uno o varios micrófonos, amplificando convenientemente esta señal eléctrica, y alimentando con ésta uno o varios altavoces, se puede generar un campo secundario, en oposición de fase, que cancele un campo primario. En el caso de un tubo, el cambio de fase se puede conseguir posicionando adecuadamente el micrófono y el altavoz. En problemas tridimensionales se pueden crear zonas de silencio alrededor de la posición de los altavoces, se pueden diseñar barreras activas en las aperturas de puertas y ventanas, y se pueden construir paredes vibrantes para conseguir habitaciones silenciosas. También se pueden cancelar los ecos molestos en salas de música y teatros, reducir selectivamente ciertas frecuencias y ajustar la calidad acústica de las salas de acuerdo a unos criterios específicos, o reducir el ruido de las máquinas de escribir.

Las ideas de Lueg, espectacularmente clarividentes, no encontraron aplicaciones prácticas hasta los años 50. Olson y May (1953) desarrollaron un sistema activo que, en la terminología actual, se trata de un controlador feedback, aplicable a la reducción local del ruido. El sistema de Olson y May, que ellos denominaron un absorbente electrónico, figura siguiente (a), consistía en un resonador de HeImholtz, con un sistema micrófono altavoz a la entrada, y con material absorbente en la pared interna opuesta. Presentaron resultados experimentales, donde se observaban cancelaciones de entre 10 y 25 dB en una banda de tres octavas, en el margen de baja frecuencia, figura siguiente (b). La eficacia de este absorbente activo dependía de la separación entre el micrófono de error y el altavoz. Como se observa en la figura siguiente (c), la cancelación es tanto mayor cuanto más próximos están el micrófono y el altavoz. Olson y May sugirieron aplicaciones tales como la reducción del ruido en la posición de las cabezas de los pasajeros de coches y aviones, o en los puestos de trabajo de una cadena de montaje industrial. El micrófono y el altavoz eran de diseño propio. El micrófono convertía las vibraciones del diafragma en una corriente de electrones en un tubo de vacío, y el altavoz reducía al máximo el cambio de fase en baja frecuencia. Era este cambio de fase el que limitaba la aplicación del sistema a frecuencias por encima de unos 30 Hz.


Sound Ceiling

The Sound Ceiling has proven over and over again to stop noise problems where all other alternatives have failed.
The JBN Sound Ceiling is a revolutionary directional speaker system designed to provide high quality sound in specific areas whilst leaving adjacent areas from excessive noise. The JBN Sound Ceiling has been in venues globally for over twenty years, we therefore have a wealth of experience to ensure your needs are met!
The Sound Ceiling is a directional speaker system that has helped numerous venue owners to meet government restrictions related to noise pollution and new ‘noise at work’ legislation by meeting appropriate conditions for the application of permanent / semi-permanent marquees and created zoning within venues where varied volume levels have been required.

jueves, 13 de noviembre de 2014

un blog para ruido y sonido


Sergio, por medio de estos blog me gustaría fuésemos armando posibles proyectos. Ahora en especifico abro el tema del "ruido". Por ser un blog de Google puedes actuar con todos lo privilegios que otorga Google.

Aquí vamos....

Retune Realtime Platform


http://retune-dsp.com/


Retune Realtime Platform

The Retune 8-channel realtime platform for the Beaglebone is a unique platform for rapid prototyping of real-time multichannel audio algorithms. 
The board features:
  • 8 analog inputs (8 ADCs)
  • 4 analog headphone outputs (4 DACs)
  • Two ADAU1772 codecs that operate in parallel
  • Sample rates from 8 to 192kHz
  • 8 digital microphone inputs (PDM)
  • 2 TDM inputs
  • Customizable firmware for the on-board Sigma-processor allowing programming of DSP applications down to 40us latency
  • Driver for Linux PSP 3.2, fully compatible with Angstrom and Ubuntu for ARM.
Retune Multichannel Platform
The Retune 8-channel audio interface for the Beaglebone, available exclusively from Retune DSP.

fuente : Retune DSP

Active noise cancellation applied to diesel exhaust

News & Analysis

Active noise cancellation applied to diesel exhaust

10/20/2010 05:22 PM EDT 
4 comments
NO RATINGS

Active noise cancellation: Trends, concepts, and technical challenges


Active noise cancellation: Trends, concepts, and technical challenges

 -October 08, 2013
Active Noise Cancelling (ANC) headsets are an attractive proposition to consumers, since they offer a superior listening experience in conditions that are normally hostile to audio reproduction, such as trains, airplanes and busy urban areas. In fact, while the idea of silencing ambient noise is a simple one, its practical implementation is complex.
Nowadays the trend for music headsets goes to big over-the-ear headsets, whereas five years ago in-ear systems were the most popular. Consumer preferences have obviously changed in the last couple of years and besides the original use case (listening to music), headsets have turned into a fashion statement.
Developing an ANC headset requires considerable know-how, especially if you want to combine a piece of art with modern ANC technology. No matter in what kind of headset ANC is implemented (in-ear, on-ear or over-the-ear headsets) there are basically three different concepts to tackle the ambient noise.
ANC Concepts The most common is the feed-forward topology (see Figure 1), in which a micro-phone exposed to the exterior senses ambient noise, and the ANC circuit generates an anti-noise signal that the speakers reproduce (together with the user's audio playback signal). This headset type consists of four blocks: the speakers, battery, ANC circuit, and ANC microphones for the left and right channels.
Figure 1: ANC Feed Forward Block Diagram
The feed-forward topology is typically used in communication headsets like Blue-tooth headsets because of its wide ANC bandwidth. Such systems can cancel noise up to 3kHz with properly designed acoustics.
The higher frequencies in particular help to improve speech intelligibility if you are making phone calls since this is the typical frequency range of human voice. Another important advantage of a feed-forward ANC system is that there is absolutely no influence on the audio signal path.
Figure 2: Feed Forward Block Diagram
Figure 2 shows the signal flow of a standard feed-forward ANC headset. The "Dff" block represents the feed-forward delay caused by the speaker due to the conversion from electrical impulses to air pressure waves. The noise signal that is picked up by the microphone is treated with a gain and phase compensation filter G(w) and mixed together with the sound signal. The music playback path is completely independent from the noise reduction path.
Another interesting mode that is commonly used in ANC headsets is the monitor mode. In this mode the ANC microphone is in turn being used to actively amplify the ambient noise. In this special mode the gain and phase compensation filter G(w) is bypassed and the microphone is connected directly to the speaker amplifier. This helps to overcome the passive attenuation of a headset when having a conversation with your neighbor or flight attended in a plane without removing the headset.
Typically this mode can be activated by pressing a push button on the headset. A disadvantage that comes with feed-forward systems is that they are susceptible to wind noise if the electronics and the acoustics are not properly designed.